Can I connect another antenna to the FieldBee RTK Base station?
To receive correction from FieldBee RTK Base station, the antenna needs to receive NMEA messages in RTCM x3 format, also receive GGA, VTG messages, update rate can be 5 or 10 Hz. For autosteer, it is needed to set up a baud rate for the 115200.
GGA at 5Hz -yes
VTG at 5Hz – yes
GSA at 1Hz -yes
GSV at 1Hz – yes
GST at 1Hz – yes
ZDA at 1Hz – yes
Baud Rate of 115200 – yes
The best way to know it is to try it.
L2 data sheet
What do I need for a functioning system?
For the functioning system you will need:
- An android tablet/smartphone. Here is a list of recommended devices.
- WiFi or a SIM card with the Internet
- RTK login details of a third party (if you don’t have your own RTK Base station)